home *** CD-ROM | disk | FTP | other *** search
- Path: informatik.tu-muenchen.de!fischerj
- From: fischerj@informatik.tu-muenchen.de (Juergen "Rally" Fischer)
- Newsgroups: comp.sys.amiga.programmer
- Subject: Re: need help on A1200/030 board programming
- Date: 29 Feb 1996 14:45:47 GMT
- Organization: Technische Universitaet Muenchen, Germany
- Distribution: inet
- Message-ID: <4h4e6r$lk8@sunsystem5.informatik.tu-muenchen.de>
- References: <38232524@kone.fipnet.fi> <406.6625T1215T1219@wr.com.au> <38232624@kone.fipnet.fi>
- NNTP-Posting-Host: hphalle2i.informatik.tu-muenchen.de
- Originator: fischerj@hphalle2i.informatik.tu-muenchen.de
-
-
- In article <38232624@kone.fipnet.fi>, "Jyrki Saarinen" <jsaarinen@kone.fipnet.fi> writes:
- |>
- |> > > Why the hell you must force source to CHIP-ram?!?
- |> >
- |> > That's not the point! This whole point is to show the speed difference.
- |> > The problem would still be there if the source was in fast, but it
- |> > wouldn't be as obvious.
- |>
- |> I still dont see the problem; with FAST-ram the copy is done
- |> in about the same time as on CHIP2CHIP on chip-only A1200
- |> compared to FAST2CHIP on A1200/030.
-
- chip2chip is 3.5meg/sec on vanilla A1200.
- chip2fast is 4.4meg/sec on 020-14, turbos are said to do even 7mb/sec.
-
- soucre in fast => no problemo.
-
- |>
- |> -- _
- |> a Stellar programmer _ //
- |> "Amiga - back for the future" \X/
-